./test 0 e440
0
Get IDaqLDevice interface
IDaqLDevice get success
Free IUnknown
OpenLDevice Handle3

Slot parameters
Base    0
BaseL   0
Mem     0
MemL    0
Type    1e
DSPType 889
Irq     0
Load Bios 2
Plata Test 0

Read FLASH
SerNum       9D771840
BrdName      E440
Rev          G
DspType      2185
IsDacPresent
Quartz       24000000

Press any key
 alloc size 131072
Buffer size(word): 131072
Pages:             32
IrqStep:           4096
FIFO:              4096
Rate:              100
Ошибка сегментирования

make
g++ test.cpp -D_REENTERANT -DLCOMP_LINUX=1 -rdynamic -O0 -Wall -I/include -L/lib -I../include -I/usr/include/nptl -L/usr/lib/nptl -ldl -lpthread -o test
test.cpp: In function ‘void* thread_func(void*)’:
test.cpp:127:17: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
  127 |    fl1=fl2= (*pp<=halfbuffer) ? 0:1;
      |              ~~~^~~~~~~~~~~~
test.cpp:131:33: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
  131 |       while(fl2==fl1) { fl2=(*pp<=halfbuffer) ? 0:1; if(ctrlc) break; usleep(10);}
      |                              ~~~^~~~~~~~~~~~
test.cpp:136:15: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
  136 |       fl1=(*pp<=halfbuffer)? 0:1;
      |            ~~~^~~~~~~~~~~~
test.cpp:119:17: warning: unused variable ‘tmp’ [-Wunused-variable]
  119 | unsigned short *tmp, *tmp1;
      |                 ^~~
test.cpp:141:1: warning: no return statement in function returning non-void [-Wreturn-type]
  141 | }
      | ^
test.cpp: In function ‘void* thread_func791(void*)’:
test.cpp:155:38: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
  155 |    fl1=fl2= (pp[I_ADC_PCI_COUNT_L791]<=halfbuffer) ? 0:1;
      |              ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
test.cpp:159:54: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
  159 |       while(fl2==fl1) { fl2=(pp[I_ADC_PCI_COUNT_L791]<=halfbuffer) ? 0:1; usleep(10);}
      |                              ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
test.cpp:163:36: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
  163 |       fl1=(pp[I_ADC_PCI_COUNT_L791]<=halfbuffer)? 0:1;
      |            ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
test.cpp:147:15: warning: unused variable ‘tmp’ [-Wunused-variable]
  147 | unsigned int *tmp, *tmp1;
      |               ^~~
test.cpp:168:1: warning: no return statement in function returning non-void [-Wreturn-type]
  168 | }
      | ^
test.cpp: In function ‘int main(int, char**)’:
test.cpp:179:9: warning: unused variable ‘dacPar’ [-Wunused-variable]
  179 | DAC_PAR dacPar;
      |         ^~~~~~
test.cpp:181:14: warning: unused variable ‘ibuf’ [-Wunused-variable]
  181 | IOCTL_BUFFER ibuf;
      |              ^~~~
In file included from test.cpp:89:
../include/stubs.h: At global scope:
../include/stubs.h:160:28: warning: ‘void atomic_dec(atomic_t*)’ defined but not used [-Wunused-function]
  160 | static /*__inline__*/ void atomic_dec(atomic_t *v)
      |                            ^~~~~~~~~~
../include/stubs.h:144:28: warning: ‘void atomic_inc(atomic_t*)’ defined but not used [-Wunused-function]
  144 | static /*__inline__*/ void atomic_inc(atomic_t *v)
      |                            ^~~~~~~~~~

./test 0 E440
0
Get IDaqLDevice interface
IDaqLDevice get success
Free IUnknown
OpenLDevice Handle3

Slot parameters
Base    0
BaseL   0
Mem     0
MemL    0
Type    1e
DSPType 889
Irq     0
Load Bios 0
Plata Test 0

Read FLASH
SerNum       9D771840
BrdName      E440
Rev          G
DspType      2185
IsDacPresent
Quartz       24000000

Press any key
 alloc size 131072
Buffer size(word): 131072
Pages:             32
IrqStep:           4096
FIFO:              4096
Rate:              100
Ошибка сегментирования

getconf PAGESIZE

sudo dmesg -c  

 
pI->RequestBufferStream(&size);
cout << " alloc size " <<  size << endl;

 
err = pI->RequestBufferStream(&size);
cout << " alloc size " <<  size << " err " << err << endl;

getconf PAGESIZE
16384

sudo dmesg -c
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[    0.000000] Linux version 6.12.34+rpt-rpi-2712 (serge@raspberrypi.com) (aarch64-linux-gnu-gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.12.34-1+rpt1~bookworm (2025-06-26)
[    0.000000] KASLR enabled
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000003a000000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x000000003a000000..0x000000003dffffff (65536 KiB) map reusable linux,cma
[    0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[    0.000000] OF: reserved mem: 0x000000003fd165c0..0x000000003fd165f7 (0 KiB) nomap non-reusable nvram@0
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] Faking node 0 at [mem 0x0000000000000000-0x000000003fffffff] (1024MB)
[    0.000000] Faking node 1 at [mem 0x0000000040000000-0x000000007fffffff] (1024MB)
[    0.000000] Faking node 2 at [mem 0x0000000080000000-0x00000000bfffffff] (1024MB)
[    0.000000] Faking node 3 at [mem 0x00000000c0000000-0x00000000ffffffff] (1024MB)
[    0.000000] Faking node 4 at [mem 0x0000000100000000-0x000000013fffffff] (1024MB)
[    0.000000] Faking node 5 at [mem 0x0000000140000000-0x000000017fffffff] (1024MB)
[    0.000000] Faking node 6 at [mem 0x0000000180000000-0x00000001bfffffff] (1024MB)
[    0.000000] Faking node 7 at [mem 0x00000001c0000000-0x00000001ffffffff] (1024MB)
[    0.000000] NUMA: Initialized distance table, cnt=8
[    0.000000] NODE_DATA(0) allocated [mem 0x3f7fd200-0x3f7fffff]
[    0.000000] NODE_DATA(1) allocated [mem 0x7fffd200-0x7fffffff]
[    0.000000] NODE_DATA(2) allocated [mem 0xbfffd200-0xbfffffff]
[    0.000000] NODE_DATA(3) allocated [mem 0xffffd200-0xffffffff]
[    0.000000] NODE_DATA(4) allocated [mem 0x13fffd200-0x13fffffff]
[    0.000000] NODE_DATA(5) allocated [mem 0x17fffd200-0x17fffffff]
[    0.000000] NODE_DATA(6) allocated [mem 0x1bfffd200-0x1bfffffff]
[    0.000000] NODE_DATA(7) allocated [mem 0x1ffb9c040-0x1ffb9ee3f]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000007ffff]
[    0.000000]   node   0: [mem 0x0000000000080000-0x000000003f7fffff]
[    0.000000]   node   1: [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   node   2: [mem 0x0000000080000000-0x00000000bfffffff]
[    0.000000]   node   3: [mem 0x00000000c0000000-0x00000000ffffffff]
[    0.000000]   node   4: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   node   5: [mem 0x0000000140000000-0x000000017fffffff]
[    0.000000]   node   6: [mem 0x0000000180000000-0x00000001bfffffff]
[    0.000000]   node   7: [mem 0x00000001c0000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003f7fffff]
[    0.000000] Initmem setup node 1 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] Initmem setup node 2 [mem 0x0000000080000000-0x00000000bfffffff]
[    0.000000] Initmem setup node 3 [mem 0x00000000c0000000-0x00000000ffffffff]
[    0.000000] Initmem setup node 4 [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 5 [mem 0x0000000140000000-0x000000017fffffff]
[    0.000000] Initmem setup node 6 [mem 0x0000000180000000-0x00000001bfffffff]
[    0.000000] Initmem setup node 7 [mem 0x00000001c0000000-0x00000001ffffffff]
[    0.000000] On node 1, zone DMA: 512 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 15 pages/cpu s193368 r8192 d44200 u245760
[    0.000000] pcpu-alloc: s193368 r8192 d44200 u245760 alloc=15*16384
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: SSBS not fully self-synchronizing
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:35:79:C9 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=ad1d71af-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=RU
[    0.000000] cgroup: Disabling memory control group subsystem
[    0.000000] mempolicy: NUMA default policy overridden to 'interleave:0-7'
[    0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[    0.000000] Fallback order for Node 0: 0 1 2 3 4 5 6 7
[    0.000000] Fallback order for Node 1: 1 2 3 4 5 6 7 0
[    0.000000] Fallback order for Node 2: 2 3 4 5 6 7 0 1
[    0.000000] Fallback order for Node 3: 3 4 5 6 7 0 1 2
[    0.000000] Fallback order for Node 4: 4 5 6 7 0 1 2 3
[    0.000000] Fallback order for Node 5: 5 6 7 0 1 2 3 4
[    0.000000] Fallback order for Node 6: 6 7 0 1 2 3 4 5
[    0.000000] Fallback order for Node 7: 7 0 1 2 3 4 5 6
[    0.000000] Built 8 zonelists, mobility grouping on.  Total pages: 523776
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8
[    0.000000] ftrace: allocating 45269 entries in 45 pages
[    0.000000] ftrace: allocated 45 pages with 4 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000094] Console: colour dummy device 80x25
[    0.000098] printk: legacy console [tty1] enabled
[    0.000166] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000170] pid_max: default: 32768 minimum: 301
[    0.000263] LSM: initializing lsm=capability
[    0.001754] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, vmalloc)
[    0.002475] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, vmalloc)
[    0.002521] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc)
[    0.002541] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc)
[    0.003255] rcu: Hierarchical SRCU implementation.
[    0.003261] rcu:     Max phase no-delay instances is 1000.
[    0.003303] Timer migration: 1 hierarchy levels; 8 children per group; 0 crossnode level
[    0.003646] EFI services will not be available.
[    0.003714] smp: Bringing up secondary CPUs ...
[    0.003897] Detected PIPT I-cache on CPU1
[    0.003933] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[    0.004163] Detected PIPT I-cache on CPU2
[    0.004190] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[    0.004382] Detected PIPT I-cache on CPU3
[    0.004400] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[    0.004431] smp: Brought up 8 nodes, 4 CPUs
[    0.004436] SMP: Total of 4 processors activated.
[    0.004438] CPU: All CPU(s) started at EL2
[    0.004440] CPU features: detected: 32-bit EL0 Support
[    0.004442] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.004444] CPU features: detected: Common not Private translations
[    0.004445] CPU features: detected: CRC32 instructions
[    0.004449] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.004450] CPU features: detected: LSE atomic instructions
[    0.004451] CPU features: detected: Privileged Access Never
[    0.004452] CPU features: detected: RAS Extension Support
[    0.004454] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.004478] alternatives: applying system-wide alternatives
[    0.005907] CPU features: detected: Hardware dirty bit management on CPU0-3
[    0.006083] Memory: 8137248K/8380416K available (14208K kernel code, 2418K rwdata, 4928K rodata, 5696K init, 647K bss, 151104K reserved, 65536K cma-reserved)
[    0.006247] devtmpfs: initialized
[    0.008126] Enabled cp15_barrier support
[    0.008131] Enabled setend support
[    0.008174] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.008178] futex hash table entries: 1024 (order: 2, 65536 bytes, vmalloc)
[    0.008285] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.008287] 0 pages in range for non-PLT usage
[    0.008288] 129308 pages in range for PLT usage
[    0.008365] pinctrl core: initialized pinctrl subsystem
[    0.008480] DMI not present or invalid.
[    0.012552] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.012923] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.012952] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.012980] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.012993] audit: initializing netlink subsys (disabled)
[    0.013036] audit: type=2000 audit(0.012:1): state=initialized audit_enabled=0 res=1
[    0.013132] thermal_sys: Registered thermal governor 'step_wise'
[    0.013140] cpuidle: using governor menu
[    0.013196] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.013215] ASID allocator initialised with 32768 entries
[    0.013431] Serial: AMBA PL011 UART driver
[    0.014068] /soc@107c000000/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /soc@107c000000/interrupt-controller@7fff9000
[    0.014211] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[    0.014329] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 16, base_baud = 0) is a PL011 rev3
[    0.014337] printk: legacy console [ttyAMA10] enabled
[    0.020016] raspberrypi-firmware soc@107c000000:firmware: Attached to firmware from 2025-05-08T14:13:17, variant start_cd
[    0.024016] raspberrypi-firmware soc@107c000000:firmware: Firmware hash is 6947117700000000000000000000000000000000
[    0.032486] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[    0.032727] iommu: Default domain type: Translated
[    0.032729] iommu: DMA domain TLB invalidation policy: strict mode
[    0.032883] SCSI subsystem initialized
[    0.032917] usbcore: registered new interface driver usbfs
[    0.032924] usbcore: registered new interface driver hub
[    0.032932] usbcore: registered new device driver usb
[    0.033005] pps_core: LinuxPPS API ver. 1 registered
[    0.033007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.033009] PTP clock support registered
[    0.033253] vgaarb: loaded
[    0.033343] clocksource: Switched to clocksource arch_sys_counter
[    0.240437] VFS: Disk quotas dquot_6.6.0
[    0.240445] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[    0.241650] NET: Registered PF_INET protocol family
[    0.241817] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, vmalloc)
[    0.243325] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, vmalloc)
[    0.243363] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, vmalloc)
[    0.243371] TCP established hash table entries: 65536 (order: 5, 524288 bytes, vmalloc)
[    0.243562] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, vmalloc)
[    0.244292] TCP: Hash tables configured (established 65536 bind 65536)
[    0.244406] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, vmalloc)
[    0.244456] UDP hash table entries: 4096 (order: 3, 131072 bytes, vmalloc)
[    0.244520] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, vmalloc)
[    0.244621] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.244771] RPC: Registered named UNIX socket transport module.
[    0.244773] RPC: Registered udp transport module.
[    0.244774] RPC: Registered tcp transport module.
[    0.244775] RPC: Registered tcp-with-tls transport module.
[    0.244777] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.244780] PCI: CLS 0 bytes, default 64
[    0.244868] Trying to unpack rootfs image as initramfs...
[    0.246434] kvm [1]: nv: 554 coarse grained trap handlers
[    0.246533] kvm [1]: IPA Size Limit: 40 bits
[    0.246548] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[    0.246590] kvm [1]: vgic interrupt IRQ9
[    0.246602] kvm [1]: VHE mode initialized successfully
[    0.247067] Initialise system trusted keyrings
[    0.247237] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[    0.247620] NFS: Registering the id_resolver key type
[    0.247628] Key type id_resolver registered
[    0.247630] Key type id_legacy registered
[    0.247640] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.247642] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.247821] Key type asymmetric registered
[    0.247825] Asymmetric key parser 'x509' registered
[    0.247848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.247882] io scheduler mq-deadline registered
[    0.247884] io scheduler kyber registered
[    0.247898] io scheduler bfq registered
[    0.248238] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508380, parent irq: 27)
[    0.248269] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508400, parent irq: 28)
[    0.248295] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d503000, parent irq: 29)
[    0.249255] ledtrig-cpu: registered to indicate activity on CPUs
[    0.399612] Freeing initrd memory: 17616K
[    0.401081] bcm2708_fb soc@107c000000:fb: FB found 1 display(s)
[    0.407994] Console: switching to colour frame buffer device 240x67
[    0.410682] bcm2708_fb soc@107c000000:fb: Registered framebuffer for display 0, size 1920x1080
[    0.410765] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
[    0.410768] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[    0.410796] simple-framebuffer 3f800000.framebuffer: fb1: simplefb registered!
[    0.440309] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.440592] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 32, base_baud = 6000000) is a Broadcom BCM7271 UART
[    0.440631] serial serial0: tty port ttyS0 registered
[    0.440863] iproc-rng200 107d208000.rng: hwrng registered
[    0.440893] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[    0.441075] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[    0.442373] brd: module loaded
[    0.443242] loop: module loaded
[    0.443325] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    0.443428] Loading iSCSI transport class v2.0-870.
[    0.444073] usbcore: registered new interface driver lan78xx
[    0.444080] usbcore: registered new interface driver smsc95xx
[    0.444123] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.444137] dwc_otg: FIQ enabled
[    0.444138] dwc_otg: NAK holdoff enabled
[    0.444139] dwc_otg: FIQ split-transaction FSM enabled
[    0.444141] Module dwc_common_port init
[    0.444315] usbcore: registered new interface driver uas
[    0.444323] usbcore: registered new interface driver usb-storage
[    0.444382] mousedev: PS/2 mouse device common for all mice
[    0.451901] rpi-rtc soc@107c000000:rpi_rtc: registered as rtc0
[    0.453287] rpi-rtc soc@107c000000:rpi_rtc: setting system clock to 1970-01-01T00:00:10 UTC (10)
[    0.453568] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[    0.453570] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.455551] sdhci: Secure Digital Host Controller Interface driver
[    0.455553] sdhci: Copyright(c) Pierre Ossman
[    0.455577] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.455632] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.455641] hid: raw HID events driver (C) Jiri Kosina
[    0.455666] usbcore: registered new interface driver usbhid
[    0.455667] usbhid: USB HID core driver
[    0.455915] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
[    0.456120] NET: Registered PF_PACKET protocol family
[    0.456142] Key type dns_resolver registered
[    0.459545] registered taskstats version 1
[    0.459597] Loading compiled-in X.509 certificates
[    0.460996] Demotion targets for Node 0: null
[    0.460998] Demotion targets for Node 1: null
[    0.461000] Demotion targets for Node 2: null
[    0.461001] Demotion targets for Node 3: null
[    0.461002] Demotion targets for Node 4: null
[    0.461003] Demotion targets for Node 5: null
[    0.461004] Demotion targets for Node 6: null
[    0.461005] Demotion targets for Node 7: null
[    0.461156] Key type .fscrypt registered
[    0.461158] Key type fscrypt-provisioning registered
[    0.462079] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@1000110000 ranges:
[    0.462083] brcm-pcie 1000110000.pcie:   No bus range found for /axi/pcie@1000110000, using [bus 00-ff]
[    0.462091] brcm-pcie 1000110000.pcie:      MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
[    0.462095] brcm-pcie 1000110000.pcie:      MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
[    0.462100] brcm-pcie 1000110000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[    0.462104] brcm-pcie 1000110000.pcie:   IB MEM 0x1000131000..0x1000131fff -> 0xfffffff000
[    0.463436] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0001:00
[    0.463439] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.463442] pci_bus 0001:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
[    0.463444] pci_bus 0001:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
[    0.463456] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[    0.463462] pci 0001:00:00.0: PCI bridge to [bus 00]
[    0.463464] pci 0001:00:00.0:   bridge window [mem 0x1b80000000-0x1bbfffffff]
[    0.463482] pci 0001:00:00.0: PME# supported from D0 D3hot
[    0.464062] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.565345] brcm-pcie 1000110000.pcie: clkreq-mode set to safe
[    0.565349] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC)
[    0.565369] pci 0001:01:00.0: [1e4b:1202] type 00 class 0x010802 PCIe Endpoint
[    0.565384] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    0.565485] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.565523] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.573354] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    0.573362] pci 0001:00:00.0: bridge window [mem 0x1b80000000-0x1b800fffff]: assigned
[    0.573365] pci 0001:01:00.0: BAR 0 [mem 0x1b80000000-0x1b80003fff 64bit]: assigned
[    0.573373] pci 0001:00:00.0: PCI bridge to [bus 01]
[    0.573375] pci 0001:00:00.0:   bridge window [mem 0x1b80000000-0x1b800fffff]
[    0.573378] pci_bus 0001:00: resource 4 [mem 0x1b80000000-0x1bffffffff]
[    0.573380] pci_bus 0001:00: resource 5 [mem 0x1800000000-0x1b7fffffff pref]
[    0.573382] pci_bus 0001:01: resource 1 [mem 0x1b80000000-0x1b800fffff]
[    0.573385] pci 0001:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
[    0.573392] pci 0001:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
[    0.573445] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[    0.573471] pcieport 0001:00:00.0: PME: Signaling with IRQ 37
[    0.573512] pcieport 0001:00:00.0: AER: enabled with IRQ 37
[    0.573619] nvme nvme0: pci function 0001:01:00.0
[    0.573633] nvme 0001:01:00.0: enabling device (0000 -> 0002)
[    0.581119] hwmon hwmon1: temp1_input not attached to any thermal zone
[    0.581134] hwmon hwmon1: temp2_input not attached to any thermal zone
[    0.581147] hwmon hwmon1: temp3_input not attached to any thermal zone
[    0.581149] nvme nvme0: min host memory (8 MiB) above limit (0 MiB).
[    0.584792] nvme nvme0: 4/0/0 default/read/poll queues
[    0.587576] nvme nvme0: Ignoring bogus Namespace Identifiers
[    0.589708]  nvme0n1: p1 p2
[    0.589877] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:
[    0.589881] brcm-pcie 1000120000.pcie:   No bus range found for /axi/pcie@1000120000, using [bus 00-ff]
[    0.589888] brcm-pcie 1000120000.pcie:      MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[    0.589892] brcm-pcie 1000120000.pcie:      MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[    0.589898] brcm-pcie 1000120000.pcie:   IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[    0.589902] brcm-pcie 1000120000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[    0.589905] brcm-pcie 1000120000.pcie:   IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000
[    0.591058] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00
[    0.591063] pci_bus 0002:00: root bus resource [bus 00-ff]
[    0.591065] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[    0.591067] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[    0.591076] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[    0.591082] pci 0002:00:00.0: PCI bridge to [bus 00]
[    0.591085] pci 0002:00:00.0:   bridge window [mem 0x1f80000000-0x1fbfffffff]
[    0.591100] pci 0002:00:00.0: PME# supported from D0 D3hot
[    0.591717] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.693344] brcm-pcie 1000120000.pcie: clkreq-mode set to default
[    0.693346] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[    0.693365] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint
[    0.693378] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff]
[    0.693384] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff]
[    0.693390] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff]
[    0.693453] pci 0002:01:00.0: supports D1
[    0.693455] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.701350] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[    0.701358] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]: assigned
[    0.701361] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned
[    0.701365] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned
[    0.701369] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned
[    0.701373] pci 0002:00:00.0: PCI bridge to [bus 01]
[    0.701375] pci 0002:00:00.0:   bridge window [mem 0x1f00000000-0x1f005fffff]
[    0.701378] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb]
[    0.701380] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref]
[    0.701382] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f005fffff]
[    0.701385] pci 0002:00:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
[    0.701392] pci 0002:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  512
[    0.701437] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
[    0.701458] pcieport 0002:00:00.0: PME: Signaling with IRQ 43
[    0.701512] pcieport 0002:00:00.0: AER: enabled with IRQ 43
[    0.701567] rp1 0002:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[    0.701570] rp1 0002:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[    0.701581] rp1 0002:01:00.0: enabling device (0000 -> 0002)
[    0.702188] rp1 0002:01:00.0: chip_id 0x20001927
[    0.706267] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 105
[    0.720923] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 111 (2c:cf:67:35:79:c9)
[    0.721688] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[    0.721913] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    0.721921] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[    0.722353] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
[    0.722361] xhci-hcd xhci-hcd.0: irq 136, io mem 0x1f00200000
[    0.722420] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    0.722422] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[    0.722425] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[    0.722461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    0.722464] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.722466] usb usb1: Product: xHCI Host Controller
[    0.722467] usb usb1: Manufacturer: Linux 6.12.34+rpt-rpi-2712 xhci-hcd
[    0.722469] usb usb1: SerialNumber: xhci-hcd.0
[    0.722568] hub 1-0:1.0: USB hub found
[    0.722579] hub 1-0:1.0: 2 ports detected
[    0.722671] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[    0.722673] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.722675] usb usb2: Product: xHCI Host Controller
[    0.722676] usb usb2: Manufacturer: Linux 6.12.34+rpt-rpi-2712 xhci-hcd
[    0.722678] usb usb2: SerialNumber: xhci-hcd.0
[    0.722735] hub 2-0:1.0: USB hub found
[    0.722745] hub 2-0:1.0: 1 port detected
[    0.722976] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    0.722980] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[    0.723409] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
[    0.723417] xhci-hcd xhci-hcd.1: irq 141, io mem 0x1f00300000
[    0.723469] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    0.723471] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[    0.723476] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[    0.723502] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    0.723504] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.723506] usb usb3: Product: xHCI Host Controller
[    0.723508] usb usb3: Manufacturer: Linux 6.12.34+rpt-rpi-2712 xhci-hcd
[    0.723509] usb usb3: SerialNumber: xhci-hcd.1
[    0.723577] hub 3-0:1.0: USB hub found
[    0.723588] hub 3-0:1.0: 2 ports detected
[    0.723668] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[    0.723671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.723672] usb usb4: Product: xHCI Host Controller
[    0.723674] usb usb4: Manufacturer: Linux 6.12.34+rpt-rpi-2712 xhci-hcd
[    0.723676] usb usb4: SerialNumber: xhci-hcd.1
[    0.723734] hub 4-0:1.0: USB hub found
[    0.723744] hub 4-0:1.0: 1 port detected
[    0.724485] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    0.724879] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[    0.725306] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    0.725727] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[    0.726229] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    0.726624] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[    0.726894] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[    0.726977] mmc0: CQHCI version 5.10
[    0.727204] mmc1: CQHCI version 5.10
[    0.728329] of_cfs_init
[    0.728365] of_cfs_init: OK
[    0.728457] clk: Disabling unused clocks
[    0.737100] PM: genpd: Disabling unused power domains
[    0.761345] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[    0.909882] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[    0.912651] Freeing unused kernel memory: 5696K
[    0.912727] Run /init as init process
[    0.912729]   with arguments:
[    0.912730]     /init
[    0.912731]     splash
[    0.912732]   with environment:
[    0.912733]     HOME=/
[    0.912734]     TERM=linux
[    0.942291] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[    0.969355] usb 3-2: new full-speed USB device number 2 using xhci-hcd
[    0.969378] usb 1-1: new full-speed USB device number 2 using xhci-hcd
[    0.994217] input: pwr_button as /devices/platform/pwr_button/input/input0
[    1.125484] usb 1-1: New USB device found, idVendor=0471, idProduct=0440, bcdDevice= 1.00
[    1.125491] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.125493] usb 1-1: Product: Module E14-440
[    1.125495] usb 1-1: Manufacturer: 'L Card' Ltd.
[    1.136536] usb 3-2: New USB device found, idVendor=0416, idProduct=b23c, bcdDevice= 0.00
[    1.136541] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.136543] usb 3-2: Product: Gaming Keyboard
[    1.165702] input: Gaming Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:0416:B23C.0001/input/input1
[    1.253345] usb 1-2: new low-speed USB device number 3 using xhci-hcd
[    1.309427] hid-generic 0003:0416:B23C.0001: input,hidraw0: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-xhci-hcd.1-2/input0
[    1.336761] input: Gaming Keyboard System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:0416:B23C.0002/input/input2
[    1.389433] input: Gaming Keyboard Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:0416:B23C.0002/input/input3
[    1.389522] input: Gaming Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:0416:B23C.0002/input/input4
[    1.389601] input: Gaming Keyboard Mouse as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:0416:B23C.0002/input/input5
[    1.389710] hid-generic 0003:0416:B23C.0002: input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-xhci-hcd.1-2/input1
[    1.396744] hid-generic 0003:0416:B23C.0003: hiddev96,hidraw2: USB HID v1.10 Device [Gaming Keyboard] on usb-xhci-hcd.1-2/input2
[    1.421556] usb 1-2: New USB device found, idVendor=09da, idProduct=000e, bcdDevice= 0.01
[    1.421562] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.421564] usb 1-2: Product: PS/2+USB Mouse
[    1.421566] usb 1-2: Manufacturer: A4Tech
[    1.458518] input: A4Tech PS/2+USB Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:09DA:000E.0004/input/input6
[    1.458591] hid-generic 0003:09DA:000E.0004: input,hidraw3: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-xhci-hcd.0-2/input0
[    1.565768] EXT4-fs (nvme0n1p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none.
[    1.638210] systemd[1]: System time before build time, advancing clock.
[    1.669421] NET: Registered PF_INET6 protocol family
[    1.669737] Segment Routing with IPv6
[    1.669747] In-situ OAM (IOAM) with IPv6
[    1.680562] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    1.680570] systemd[1]: Detected architecture arm64.
[    1.682042] systemd[1]: Hostname set to <raspberrypi>.
[    1.815080] systemd[1]: Queued start job for default target graphical.target.
[    1.833845] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    1.834064] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    1.834230] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[    1.834387] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    1.834479] systemd[1]: Created slice user.slice - User and Session Slice.
[    1.834530] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    1.834672] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    1.834692] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-ad1d71af\x2d01.device - /dev/disk/by-partuuid/ad1d71af-01...
[    1.834700] systemd[1]: Expecting device dev-dri-card0.device - /dev/dri/card0...
[    1.834707] systemd[1]: Expecting device dev-dri-renderD128.device - /dev/dri/renderD128...
[    1.834715] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10...
[    1.834738] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    1.834771] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[    1.834794] systemd[1]: Reached target slices.target - Slice Units.
[    1.834811] systemd[1]: Reached target swap.target - Swaps.
[    1.834831] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    1.834928] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[    1.834973] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    1.835157] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[    1.835237] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    1.835319] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    1.835496] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    1.835566] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    1.835672] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[    1.836214] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    1.836884] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    1.837772] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    1.837926] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[    1.839106] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[    1.839934] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    1.840802] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    1.841874] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    1.843168] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    1.844777] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    1.846186] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    1.847636] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    1.848623] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[    1.848757] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    1.853548] systemd[1]: Starting systemd-journald.service - Journal Service...
[    1.855050] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    1.856534] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    1.857111] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    1.859276] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    1.860056] fuse: init (API version 7.41)
[    1.861269] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    1.861901] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    1.862080] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    1.865420] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[    1.866095] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    1.866448] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    1.866578] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    1.866834] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    1.866940] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[    1.867152] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    1.867245] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    1.867514] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    1.867623] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    1.867828] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    1.867913] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[    1.869570] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    1.870882] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    1.871096] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[    1.874215] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[    1.875394] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    1.875574] i2c_dev: i2c /dev entries driver
[    1.877694] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[    1.879184] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[    1.879490] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    1.879653] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    1.889621] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[    1.893386] EXT4-fs (nvme0n1p2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w.
[    1.894268] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[    1.894487] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    1.894523] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    1.895289] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[    1.896146] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[    1.902429] systemd[1]: Started systemd-journald.service - Journal Service.
[    1.910428] systemd-journald[305]: Received client request to flush runtime journal.
[    1.912122] systemd-journald[305]: File /var/log/journal/2dc4e9bbb3d246f8b06c91b5e9d2bcb7/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    2.096258] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[    2.096327] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[    2.099219] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[    2.105070] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[    2.105312] mc: Linux media interface: v0.10
[    2.107482] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[    2.111578] rp1-firmware rp1_firmware: RP1 Firmware version eb39cfd516f8c90628aa9d91f52370aade5d0a55
[    2.111800] rp1-pio 1f00178000.pio: Created instance as pio0
[    2.116439] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[    2.117982] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[    2.118088] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[    2.121299] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[    2.122007] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[    2.150274] videodev: Linux video capture interface: v2.00
[    2.207946] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.215079] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    2.215283] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    2.215475] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.215663] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    2.218674] ldevice: loading out-of-tree module taints kernel.
[    2.246415] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[    2.246429] pispbe 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[    2.246440] pispbe 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[    2.246451] pispbe 1000880000.pisp_be: Adding to iommu group 0
[    2.246457] pispbe 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[    2.246697] brcmfmac: F1 signature read @0x18000000=0x15264345
[    2.252056] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    2.252380] Bluetooth: Core ver 2.22
[    2.252510] NET: Registered PF_BLUETOOTH protocol family
[    2.252513] Bluetooth: HCI device and connection manager initialized
[    2.252520] Bluetooth: HCI socket layer initialized
[    2.252523] Bluetooth: L2CAP socket layer initialized
[    2.252535] Bluetooth: SCO socket layer initialized
[    2.255380] usbcore: registered new interface driver ldevusb
[    2.270692] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[    2.270699] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[    2.270733] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[    2.270738] rpi-hevc-dec 1000800000.codec: Adding to iommu group 0
[    2.270741] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[    2.298195] Bluetooth: HCI UART driver ver 2.3
[    2.298229] Bluetooth: HCI UART protocol H4 registered
[    2.300962] rpi-hevc-dec 1000800000.codec: Device registered as /dev/video19
[    2.322996] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    2.323059] Bluetooth: HCI UART protocol Broadcom registered
[    2.325452] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[    2.325498] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[    2.397746] usbcore: registered new interface driver brcmfmac
[    2.573204] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[    2.573515] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[    2.579722] ieee80211 phy0: brcmf_cfg80211_reg_notifier: Firmware rejected country setting
[    2.677761] Bluetooth: hci0: BCM: chip id 107
[    2.677963] Bluetooth: hci0: BCM: features 0x2f
[    2.679004] Bluetooth: hci0: BCM4345C0
[    2.679007] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[    2.679692] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[    3.065274] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.065280] Bluetooth: BNEP filters: protocol multicast
[    3.065286] Bluetooth: BNEP socket layer initialized
[    3.081997] Adding 524272k swap on /var/swap.  Priority:-2 extents:8 across:2228224k SS
[    3.197159] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[    3.197170] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[    3.201053] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[    3.235758] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[    3.369972] Bluetooth: hci0: BCM: features 0x2f
[    3.371301] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[    3.371304] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[    3.371615] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[    3.390902] Bluetooth: MGMT ver 1.23
[    3.394179] NET: Registered PF_ALG protocol family
[    7.299343] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   33.246831] Bluetooth: RFCOMM TTY layer initialized
[   33.246844] Bluetooth: RFCOMM socket layer initialized
[   33.246851] Bluetooth: RFCOMM ver 1.11

./test 0 E440
0
Get IDaqLDevice interface
IDaqLDevice get success
Free IUnknown
OpenLDevice Handle3

Slot parameters
Base    0
BaseL   0
Mem     0
MemL    0
Type    1e
DSPType 889
Irq     0
Load Bios 0
Plata Test 0

Read FLASH
SerNum       9D771840
BrdName      E440
Rev          G
DspType      2185
IsDacPresent
Quartz       24000000

Press any key
 alloc size 131072 err 2
Buffer size(word): 131072
Pages:             32
IrqStep:           4096
FIFO:              4096
Rate:              100
Ошибка сегментирования

xxd test.dat | less

 shared word 0 0
 shared word 0 0
 shared word 1000 0
 shared word 2000 0
 shared word 3000 0
 shared word 4000 0
 shared word 5000 0
 shared word 6000 0
 shared word 7000 0
 shared word 8000 0
 shared word 9000 0
 shared word a000 0
 shared word b000 0
 shared word c000 0
 shared word d000 0
 shared word e000 0
 shared word f000 0
 shared word 10000 0
 shared word 11000 0
 shared word 12000 0
 shared word 13000 0
 shared word 14000 0
 shared word 15000 0
 shared word 16000 0
 shared word 17000 0
 shared word 18000 0
 shared word 19000 0
 shared word 1a000 0
 shared word 1b000 0
 shared word 1c000 0
 shared word 1d000 0
 shared word 1d000 0
 shared word 1e000 0
 shared word 1f000 0
 shared word 20000 0
 

000dcbb0  14 f6 09 f6 0d f6 0b f6  1a f6 0e f6 14 f6 12 f6  |................|
000dcbc0  21 f6 16 f6 1b f6 17 f6  29 f6 1e f6 22 f6 1d f6  |!.......)..."...|
000dcbd0  2e f6 23 f6 28 f6 26 f6  34 f6 29 f6 2e f6 2b f6  |..#.(.&.4.)...+.|
000dcbe0  39 f6 2e f6 34 f6 31 f6  42 f6 37 f6 3b f6 38 f6  |9...4.1.B.7.;.8.|
000dcbf0  49 f6 3e f6 43 f6 40 f6  50 f6 44 f6 4b f6 47 f6  |I.>.C.@.P.D.K.G.|
000dcc00  56 f6 4b f6 51 f6 4d f6  5d f6 53 f6 57 f6 53 f6  |V.K.Q.M.].S.W.S.|
000dcc10  64 f6 5a f6 5f f6 5b f6  6e f6 62 f6 68 f6 64 f6  |d.Z._.[.n.b.h.d.|
000dcc20  74 f6 6a f6 72 f6 6d f6  7d f6 72 f6 78 f6 74 f6  |t.j.r.m.}.r.x.t.|
000dcc30  85 f6 7a f6 80 f6 7b f6  8c f6 82 f6 89 f6 83 f6  |..z...{.........|
000dcc40  95 f6 89 f6 91 f6 8d f6  9f f6 94 f6 9a f6 96 f6  |................|
000dcc50  a7 f6 9c f6 a2 f6 9d f6  af f6 a4 f6 ab f6 a7 f6  |................|
000dcc60  b9 f6 ae f6 b5 f6 b0 f6  c2 f6 b6 f6 be f6 b9 f6  |................|
000dcc70  cc f6 c1 f6 c6 f6 c2 f6  d5 f6 c9 f6 d1 f6 cc f6  |................|
000dcc80  df f6 d5 f6 dc f6 d6 f6  ea f6 df f6 e6 f6 e1 f6  |................|
000dcc90  f4 f6 e9 f6 f1 f6 ec f6  ff f6 f6 f6 fc f6 f7 f6  |................|
000dcca0  0b f7 01 f7 08 f7 03 f7  15 f7 0b f7 13 f7 0d f7  |................|
000dccb0  21 f7 17 f7 1e f7 19 f7  2d f7 23 f7 29 f7 24 f7  |!.......-.#.).$.|
000dccc0  37 f7 2e f7 34 f7 30 f7  43 f7 38 f7 3f f7 3a f7  |7...4.0.C.8.?.:.|
000dccd0  4d f7 43 f7 49 f7 43 f7  57 f7 4e f7 53 f7 4e f7  |M.C.I.C.W.N.S.N.|
000dcce0  61 f7 57 f7 5d f7 58 f7  6b f7 61 f7 66 f7 60 f7  |a.W.].X.k.a.f.`.|
000dccf0  74 f7 6a f7 71 f7 6c f7  7f f7 75 f7 7a f7 75 f7  |t.j.q.l...u.z.u.|
000dcd00  89 f7 80 f7 85 f7 80 f7  95 f7 8a f7 91 f7 8a f7  |................|
000dcd10  9d f7 95 f7 9b f7 95 f7  a8 f7 9e f7 a5 f7 9f f7  |................|
000dcd20  b3 f7 aa f7 af f7 ab f7  bd f7 b5 f7 bb f7 b5 f7  |................|
000dcd30  c9 f7 c0 f7 c6 f7 c0 f7  d5 f7 cc f7 d0 f7 cc f7  |................|
000dcd40  de f7 d6 f7 dd f7 d6 f7  ea f7 e1 f7 e7 f7 e2 f7  |................|
000dcd50  f6 f7 ec f7 f2 f7 ec f7  01 f8 f7 f7 fd f7 f6 f7  |................|
000dcd60  0b f8 03 f8 09 f8 02 f8  16 f8 0e f8 14 f8 0e f8  |................|
000dcd70  22 f8 19 f8 20 f8 18 f8  2d f8 25 f8 2a f8 24 f8  |"... ...-.%.*.$.|
000dcd80  38 f8 2f f8 35 f8 2f f8  43 f8 3a f8 40 f8 39 f8  |8./.5./.C.:.@.9.|
000dcd90  4d f8 44 f8 4a f8 44 f8  57 f8 4f f8 56 f8 4f f8  |M.D.J.D.W.O.V.O.|
000dcda0  64 f8 5b f8 61 f8 5a f8  6e f8 67 f8 6c f8 66 f8  |d.[.a.Z.n.g.l.f.|
000dcdb0  7a f8 72 f8 77 f8 72 f8  87 f8 7b f8 7d f8 85 f8  |z.r.w.r...{.}...|

          
    adcPar.t1.NCh = 4;
    adcPar.t1.Chn[0] = 0x0;
    adcPar.t1.Chn[1] = 0x1;
    adcPar.t1.Chn[2] = 0x2;
    adcPar.t1.Chn[3] = 0x3;